Causes and ways to fix the error that the computer automatically restarts

Are you stuck because your computer keeps restarting on its own? Let's learn how to fix the error of the computer restarting continuously in the following article.

computer automatically restarts

You are experiencing the situation that the computer automatically restarts or is powered off continuously while working, playing games on a regular basis without any notice. Don't worry too much, follow this article for instructions on how to fix it! 

1. Turn off Automatic Restart

Step 1: Press Windows + R key combination > Enter sysdm.cpl > OK.


Step 2: Select the Advanced tab > Settings in the Startup and Recovery section.

windows Advanced tab

Step 3: In the System failure section, turn off the checkbox in the Automatically restart> OK box to save the changes.
System failure section windows

2. Scan for viruses on your computer

Most likely ᴠιrus is the reason for this auto-rebooting error, so try scanning your computer for ᴠιrus.

3. Change Power Options

Step 1: Type control panel in the search box > Press Enter.

Power Options

Step 2: In the View by section, select the view mode as Large icons > Select Power Options.

Power Options

Step 3: Select Change plan settings from the battery mode you are using on the device.

power settings

Step 4: Select Change advanced power settings.

power management

Step 5: Find and select Processor power management > Select Minimum processor state > Change the value of On battery and Plugged in to 5%.


Step 6: Click OK to save the settings.

4. Reinstall the computer driver

This problem of computer restarting errors can be caused by incompatible or outdated computer drivers. Especially the driver of the video card (Graphic card) is the most common reason for the computer to hang and restart continuously. Therefore, you should check and update the graphics driver for your computer.

Step 1: Press Windows + R to open the Run dialog box > Enter devmgmt.msc > Click OK.

devmgmt.msc /></a></div><div class=
Step 2: Double-click Display adapters to display all drivers


Step 3: Right-click on the graphic card you are using and select Uninstall device.

device manager

Step 4: Restart the computer so that Windows automatically reinstalls the driver for you.

5. Check CPU temperature 

If your computer is too hot, you will have trouble restarting while playing the game. Because when the CPU has to handle too many tasks, it generates high power and generates heat, the computer will automatically shut down to protect itself. Therefore, you should check the temperature of the machine to prevent overheating by using computer temperature measurement software.

The above is a summary of ways to handle the situation of the computer restarting continuously. We hope you can apply to fix your machine. It is important to remember to take good care of and maintain the machine as well as pay attention to software errors on the machine. Don't forget to Like & Share this post if you find it useful.

Determine the cause of the error that the computer restarts continuously

Physical causes

A civilized person is to be clean in all cases. With your computer too, cleaning it properly will prevent some errors. Just like you keep your body clean, regular cleaning and maintenance will help prevent physical damage.

Over time, dirt will accumulate inside the machine if not cleaned properly. If you do not pay attention to this, a series of problems such as automatic restart errors will occur continuously. You need to understand that dust interferes with the connection of electronic components and the system will not recognize it, and when the system cannot detect the cause of the error from dirt, the restart loop will automatically start.

You will need to thoroughly clean each electronic part, paying special attention to the RAM sticks to avoid looping. Here's how to do it: 

Turn off the computer.
* Unplug from outlet.
* Wear an anti-static bandage (you can also rub your hands on metal surfaces to remove static on your hands to prevent damage to internal components).
* Use cleaning kit: screwdriver, can of compressed air and cleaning cloth.
* Check your RAM sticks for deposits, clean with eraser and clean RAM sticks.
* This is the first operation. If your machine hasn't been serviced, it's time to start dusting.

Software cause

Pay attention to the maintenance of the operating system before thinking about checking for faulty software. This is the first and simplest task.

There will also be some software problems like: file system, memory, corrupted installation registry or wrong device partition etc. A common cause of this problem is lack of software maintenance. However, the Windows Recovery Drive tool should be the first choice to fix these problems.

Another effective solution is to repair Registry Editor. Here's how to do it:

Boot from the Recovery drive.
Go to Advanced options.
Select Command Prompt.
Type Regedit and press Enter.
In Registry Editor enter: Computer/HKEY_LOCAL_MACHINE/SYSTEM/Setup/Status/ChildCompletion
Find Setup.exe and double click on the right panel you see.
Change the Value Data field to 3 and press Ok.
Close the workbook.
Finally, click OK on the error message to restart the PC.

Hardware cause

It sounds complicated but actually we can solve it with simple methods.

The first thing that can be done is a hard boot. You press and hold the power button for 3-5 seconds until the device turns off. Wait 10 seconds and then reboot. Often people will not wait 10 seconds and rush to restart right away, which is completely wrong. After that, you will see that the restart loop is gone, check if your PC has started up fine. If you overclock your machine, the system is definitely turned upside down. Remove the CMOS battery and wait for 8-10 minutes, then put it back in. Restart the machine as usual and check if the error still occurs or not. Is your device too hot? The GPU has reached the threshold and the autostart mechanism is activated. Just turn off and let the machine rest for about 15 minutes. You might consider using MSI AFTERBURNER overclocking software to monitor CPU and GPU temperatures. System control panel connectors: check these connectors as they may be loose. If this problem occurs after updating the operating system, it is possible that the error is caused by the quality update (KB3081424) not completing. From the boat leads to Windows 10 registration errors. In this case, you can handle it in 2 ways as follows:

Go to: Start > Settings > Update & Security > Windows Update > Check for updates. An additional patch may fix the reboot issue.
Use your Windows 10 CD and reboot your PC from the CD. Continue with the following steps:
In the lower left corner, click on the Repair option.
Now choose: Troubleshoot.
Click on Advanced Options>Command Prompt and enter these commands in the same order: ▪ Bootrec /fixmbr ▪ Bootrec /fixboot ▪ Bootrec /scanos ▪ Bootrec /buildbcd

So the above article has fully and detailed instructions on how to fix the error of restarting automatically while working or working on the computer. Wishing you success!


Post a Comment

Previous Post Next Post

quang cao truoc post bai

quang cao sau khi pots bai